Norma REVO SC2 LN – Fra 80.400,-

Norma REVO SC2.

Dette er en ekte alt-i-ett forforsterker med mulighet til å legge til DAC og MM/MC RIAA.
DAC delen er en helt egen enhet inne i forsterkeren og har hele 5 innganger.
Særdeles velspillende og musikalsk forforsterker.

MM/MC Kort – 7.200,-
DAC – 34.800,-

Denne kan også kjøpes i sort farge mot et tillegg på 3.500,-

For Bestilling eller spørsmål, ta kontakt her: Endpoint Audio

Eller ring på 47832922
Mvh Tom Egil

 

I REVO SC-2 forforsterkeren kombineres en ren og elegant stil med den mest raffinerte teknologien. REVO SC-2-modellen er fullstendig fjernstyrbar i alle sine funksjoner, og bruker den eksklusive P.D.D.A. (Programmable Digital Analogue Attenuation) volumkontrollen. Det er et system som demper mellom 0,0 dB og -127,0 dB i trinn på 0,5 dB, med en typisk presisjon på +/- 0,01 dB.

I tillegg bruker inngangsvalget reléer av høy kvalitet, ingen integrert krets brukes på signalbanen. Hele konseptet med REVO SC-2 har en tendens til å kombinere en moderne operativ funksjonalitet med alvorlighetsgraden for lydsignal som er typisk for en utarbeide som egentlig er High-End. Plasmaskjermen med justerbar lyshetsintensitet er alltid godt synlig på avstand, og takket være mikroprosessorstyringen og en dedikert programvare, kombinerer REVO SC-2 enkelhet og komfort med ekstraordinær allsidighet, fullstendighet og tilpasning av funksjoner. SC-2-forforsterkeren kan monteres med et Phono-trinn, og også oppdateres til flerkanalsmodus. Endelig kan den fungere både i aktiv og passiv modus

Beskrivelse

In the REVO SC-2 preamplifier, a pure and elegant style combines with the most refined technology. Completely remote-controllable in all its functions, the REVO SC-2 model uses the exclusive P.D.D.A. (Programmable Digital Analogue Attenuation) volume control. It a system that attenuates between 0.0 dB and -127.0 dB in steps of 0.5 dB, with a  typical precision of +/- 0.01 dB.

Plus, the input selection uses high-quality relays, no integrated circuit is used on the signal path. The whole conception of the REVO SC-2 is tended to combine a modern operative functionality with the severity for audio signal typical of a devise which is really High-End. Its plasma display with adjustable lightness intensity is always clearly visible from a distance, and thanks to the microprocessor management and a dedicated software, the REVO SC-2 combines simplicity and comfort with extraordinary versatility, completeness and functions customization. The SC-2 preamplifier can be mounted with a Phono stage, and also updated to the Multichannel mode. Finally, it can work both in Active and Passive mode.

 

– Extreme low noise, high speed schematic topology and wide band ( >2 MHz ).

– High filtering capacity (51.000 uF) with numerous (23) capacitors, to achieve low impedance.

– Toroidal power transformers specially designed for audio applications, low flow dispersion, low mechanical noise, high permeability magnetic core with consequent low output impedance.

– Full aluminium non-magnetic frame.

– Inputs & Outputs configurable RCA (unbalanced) & XLR (balanced)

– Inputs selection by relay with GOLD/PALLADIUM contacts.

– RCA solid core gold plated plug connector for any signal connections.

– P.D.A.A. Programmable Digital Analogue Attenuation, volume control

– 0.5 dB step an 127.5 dB range attenuation, made by relays and high quality precision resistors.

– Active or Passive modality for best audio performance.

– Possibility of set the PHONO board inside, by 2 mono board for Left & Right channel.

– High quality phono stage, for MM and MC pick-ups.

– Two free slots for future upgrades.

– Possibilities of upgrades with MCH-6 (Multichannel board with 2 set of 6 inputs, outputs) for Audio-Video application.

– Possibilities of upgrades with DAC Board with USB & SPDIF inputs, 24 Bit, 192 kHz resolution.

– Remote control of all functions with NORMA remote control.

The possibility of adding the DAC-1 option to the REVO SC-2 makes it an even more universal and interesting device.

It is not just the addition of a digital input, but a proper complete DAC section, which technological refinement places it at the top of world production levels. It is indeed a very similar solution to the one mounted on REVO DAC-1 and DS-1, and on the brand new HS-DA1, from which differs only in the practical implementation, while functionality and performance are the same.

Plus, since it integrates the conversion section in the preamplifier, it eliminates the need for proper interconnection cables which, if high quality, could cost much more than the DAC option or even than an external DAC unit.

 

The DAC-1 board has a USB input which can work up to 192 KHZ, 4 SPDIF inputs, as well as optical coaxial and XLR inputs. The conversion section is handled by a pair of PCM1704, very high quality True PCM multibit converters.

For further technical characteristics you can refer to the ones of the previously mentioned models.

Input: 4 RCA, 2 XLR Balanced, Optional Phono at INPUT 1
Input Impedance: 47Kohm (not selected input) / 10 Kohm (Selected Input)
Input Configuration: Phono MM/MC, Line, Balanced, Multichannel & DAC option
Output: 1 RCA, 1 XLR Balanced
Output Impedance: 220 ohm
Output Voltage: 7.5 V r.m.s.
Frequency Response: 0 Hz – 2.0 MHz (-3dB, non filtered)
Gain: 17.5 dB Active mode, 0 dB Passive mode
Circuitation: Solid state, Dual Mono, hi speed, low noise
Supply: 230 V AC / 50 Hz (100V AC or 115 VAC / 50-60Hz in some countries)
Dimensions (HxWxD): 110 x 430 x 365 mm
Weight: 15 Kg
Note: Stereophonic Preamplifier completely RC

– Optional board, to be fitted in a spare slot.
– 5 digital inputs, USB, 2 x SPDIF RCA, SPDIF OPTICAL, AES-EBU.
– USB input and SPDIF full bandwidth, up to 24 Bit / 192 KHz.
– Possibility to select the oversampling frequency 44.1-48.0-88.2-96.0-176.4-192.0 KHz or AUTO.
– Possibility to customise for each digital input all parameters, including the value of oversampling.
– Possibility to use as the master A/D clock source the local oscillator or the clock form input signal.
– Two separate local clock oscillator for the two values . 22MHz / 24 MHz (44.1 / 48KHz).
– Local Oscillator high stability, low Jitter and low phase noise.
– Possibility to configure one of the 2 RCA inputs as digital output.
– Two PCM 24 Bit Digital to Analogue converter.
– Digital filter x8 oversampling.
– User selectable filter roll-off (Sharp & Slow).
– Proprietary I-V architecture conversion.
– Analogue output stage based with full discrete devices amplifier.
– Extreme low noise, high resolution and high speed.
– Wide band ( >2 MHz ) schematic topology.
– Full remote controlled by REVO SC2

 Note : Specification subject to change without notice

The optional Phono board PH-3 for the REVO SC-2 preamplifier adds to the device the functions of impedance matcher, RIAA equalizer and preamplifier, to receive a signal from a turntable.
It has the peculiar characteristic, and probably unique in its genre, to be made in dual-mono layout: the two channels are placed on two independent boards, and the power supply is separately stabilized and filtered, to deliver the best possible quality.
It’s able to receive signal from MC (Moving Coil) and MM (Moving Magnet) turntables, simply by replacing an integrated circuit (provided as standard). It’s possible to vary the load seen by the head by moving a switch, that commutates between 4 standard resistance values (100,500, 1K, 47 Kohm) and a user-definable value, which can be chosen by inserting a resistor.
The gain value is variable with a similar system, with a range that goes from 34 dB to 52 dB in six steps, plus a value definable by the user, again just by inserting a resistor.
The PH-3 board is made with very-low-noise components, which are able to handle turntables with a robust output, and also work perfectly with heads that have a lower sensibility. With its very accurate layout, that makes the setting operations very simple, this board will let you appreciate at best the expressive nuances of an analog source, without compromising its natural character.

 

– Optional board, to be fitted in a main line board (Left & Right).
– 2 mono single mono phono board, independent for Left & Right.
– Both, MM & MC pick-up
– Two different OpAmp for MM & MC pick-up, can be easily swapped by the user, to achive the best S/N ratio.

 

Phono Input Impedance: 47 KOhm, 1 KOhm, 500 Ohm. 100 Ohm, Spare
Phono Gain: 34 dB, 38 dB, 42 dB, 46 dB, 50 dB, 52 dB, Spare
Output Voltage: 24 V Peak to Peak

Note : Specification subject to change without notice

The multichannel option is born to extend the versatility of the SC-2 to Home Theater High-End systems, without compromising the sonic performance.
The frontal channels, which represent the primary source in stereo mode, are handled by the excellent stereo section of the SC-2, while the 4 additional channels are handled by a high-quality stage with 2 sets of multichannel analog inputs. The selection is operated by relays in inert atmosphere with cross-bar contacts in gold-palladium.
To preserve the “classic” NORMA sonic characteristics (neutrality, speed, dynamics, etc) the multichannel board circuit topology has been studied in order to minimize the components on the signal path, and therefore their influence.
As already specified, with the MCH-6 option, 2 different multichannel sources can be handled simultaneously, in addition to stereophonic inputs.
For both sets of multichannel inputs the user can define a 6-value reference array to calibrate the speaker’s sensibility or to compensate eventual gain differences between the several power amplification stages.
With the MCH-2 option installed, the SC-2 maintains its ability to commutate between active and passive mode. Plus, it’s really simple to combine any of the two sets of multichannel inputs (A, B) with any of the stereo inputs (1-6).

 

– Optional board, to be fitted in a spare slot.
– 2 x 4 Analog Inputs for 2 Multichannel extention inputs
– 1 x 4 Analog Ouputs for  Multichannel extention ouputs
– Volume Control, Step 0.5 dB from 0dB to –127.5 dB, for each of 6 channel
– Reference level Variable from – 40 e + 40 dB for each set of multichannel input.
– Possibility of 2 different reference level setting for each multichannel inputs
– Full remote controlled by REVO SC2

 

Inputs: 2 x 4 Analog Inputs for 2 Multichannel extention inputs
Outputs: 1 x 4 Analog Ouputs for Multichannel extention ouputs
Output Impedance: 200 ohm
Volume Control: Step 0.5 dB from 0dB to –127.5 dB, for each of 6 channel
Configuration: Solid state
Frequency Response: DC – 800 KHz
Output overload: 24 V Peak to Peak
Reference level: Variable from – 40 e + 40 dB for each set of multichannel input.
Possibility of 2 different reference level setting for each multichannel inputs
Note: Full remote controlled by REVO SC2

Note : Specification subject to change without notice