Bricasti M15 – 206.000,-

Balanced Topology
The M15 stereo power amplifier is a true reference design in analog power amplification, an
uncompromising design based on our M28 mono blocks, offering extremely low distortion with moderate
power and a unique truly balanced topology rarely seen in the industry. When combined with our M1 DAC
or M12 Source Controller driving the M15 one can achieve a fully differential signal path, from the
converter to the loudspeaker.

The intention of the M15 is to provide state of the art analog power amplification, utilizing the best designs
and materials that can be found today. The power amplifier is a very critical part of audio chain, it has to
take the incoming signal and amplify it and most important to deal with the load of the loudspeaker and
control its back EMF with precise control. The sound of the M15 is intended to be transparent and
revealing, and fully dynamic with no sense of limits and compression in the reproduction, on any
loudspeaker.
Many hours of listening were done to tune the M15 to an exacting sound, with all types of music, and with
extensive testing done in the studio and in the home. We hope you find the M15 to be pleasing and
enjoyable to hear and use in the home, or as a precision tool for high level reference monitoring for the
professional.

Beskrivelse

Model 15 Stereo Power Amplifier

The Bricasti M15 stereo amplifier is the beating heart of any system and in particular, a Bricasti Design system. Like its bigger mono-block brother the M28, the M15 delivers heaps of power at critical stages, forging a sonic path of least resistance all the way from source to the speaker. This can be heard and felt and is in part thanks to its fully differential / balanced architecture.

Precise control

The power amplifier is a very critical part of the audio chain. It has to take the incoming signal and amplify it and most importantly, deal with the load of the loudspeaker and control its back EMF with precision. The sound of the M15 is intended to be transparent and revealing with low distortion, and fully dynamic with no sense of limits and compression in the reproduction, on any loudspeaker.

Balanced power

The M15 stereo power amplifier is a true reference design in analog power amplification, an uncompromising design offering extremely low distortion with moderate power and a unique truly balanced topology rarely seen in the industry. When combined with our M1 DAC or M12 Source Controller driving the M15 one can achieve a fully differential signal path, from the converter to the loudspeaker.

Modern application

The intention of the M15 is to integrate seamlessly into your existing system while allowing for a more compact form factor. A unique feature like trim control lets you properly gain stage the M15, critical with todays digital sources driving the amplifier directly. You also enjoy the same sonic benefits of the M28 monoblock with the stillpoints isolation designed directly into the feet.

Handcrafted in the USA

All of our products are crafted in the old world tradition, in a classic brick mill building in Massachusetts USA by a team of individuals dedicated to excellence.

 

Dimensions:

Height: 25,5 cm      Widht: 43 cm         Deep: 46 cm           Weight 41 kg

Total Harmonic Distortion THD+N less than 0.005% 20hz-20kHz at full rated power into 8 and 4 ohms.
Power 125W into 8 ohms, 250W into 4 ohms, 500W into 2 ohms.
Frequency response 10hz-150kHz, within 0.5db.
Signal to Noise greater than 85db at full rated power.
Power Topology Fully Differential.
Balanced Input XLR connector 200k ohm impedance.
Unbalanced Input RCA connector 100k ohm impedance.
Weight 90 lbs.
Shipping Weight 110 lbs.
Finish Anodized Aluminum.
Mains Voltage set at factory 100, 120, 220, 230, 240 VAC, 50 Hz – 60 Hz.
Trigger In TRS connector for 5V external trigger.
Input Trim 0db, -6db, -12db,-18db of attenuation.
Power consumption 60W standby, 2W idle.
Warranty parts and labor 5 yrs limited.